Back to article
3348
Reconnecting a Bluetooth device that you have already connected
Your product remembers the last several Bluetooth devices it was paired to so that it can quickly and automatically reconnect to them. This is useful if your product connects to a different device when you turn it on, or if you just want to switch to a different device.
Reconnecting a Bluetooth® device that you previously connected happens automatically.
When you press the Bluetooth button on the control module, your headset tries to auto-select the last connected Bluetooth device. If that device is not available and you've connected other devices, there might be a short delay while it looks for those other devices in order of last connected.
To connect to a different device, put your headset in paring mode by holding the Bluetooth button for 5 seconds, then select your headset from the Bluetooth menu of the device you want to connect. For more help, see Connecting a Bluetooth device.
To connect to a different device, put your headset in paring mode by holding the Bluetooth button for 5 seconds, then select your headset from the Bluetooth menu of the device you want to connect. For more help, see Connecting a Bluetooth device.
If you are unable to connect a Bluetooth device
See troubleshooting for Cannot connect a Bluetooth device.
Was this article helpful?
Thank you for your feedback!