Setting up your product

1. Connect the audio input cable from the Acoustimass module jack on the system console to the Media Center jack on the Acoustimass bass module
2. Connect the speaker cable from the SPEAKERS jack on the bass module to the speakers
   Tip: The left and right speakers should be on your left and right as you face the TV
3. Connect an HDMI cable from the HDMI OUT Video to TV jack on the system console to an available HDMI input on the TV
4. Connect a power cord from the Power jack on the Acoustimass bass module to an AC (mains) outlet
5. Connect the power supply to the from the Power jack on the system console
6. Connect a power cord from the power supply to an AC (mains) outlet

For speaker placement suggestions, see Speaker placement and positioning.

For more information on how to run ADAPTiQ, see ADAPTiQ system setup and deactivation.

The ADAPTiQ audio calibration software, included with the system, automatically tests the acoustics of the listening area, analyzes speaker placement and tailors the sound of the system to the specific acoustics of the room.

For more info, see Connecting other devices to your system.